Stainless steel plate seperator 50
Key words: stainless steel plate separator
The plate separator has a wide application range, high processing effect and small area. It is suitable for inlet sand removal, general industrial and domestic water supply sedimentation, sewage sedimentation, oil separation and tailings concentration, etc.
Stainless steel plate separator, also called metal inclined plate packing, hexagonal honeycomb packing, mainly used for the treatment of feed oil and gas, waste water and oil water separation, environmental protection equipment and crude oil processing devices, three-phase separator or two-phase separator , crude oil settler, sludge flow fog separator, first class separator as filler for oil and water separation, dust sedimentation and removal. The plate separator has a wide application range, high processing effect and small area. It is suitable for inlet sand removal, general industrial and domestic water supply sedimentation, sewage sedimentation, oil separation and tailings concentration, etc.
The principle of using metal plate separators is based on the theory of sedimentation with a low layer of sediment as a base, using a porous shaped inclined tube sedimentation environment, whereby water containing suspended particles in the smaller and smooth opening of the inclined tube settles quickly, greatly increases the structure of water production, reduces area and investment in construction, so this technology is widely used. This product has the advantages of anti-corrosion, large surface area, long service life, accurate size, compact structure, safe and non-toxic, smooth wall surface, easy to clean, easy to maintain, easy to assemble on site, which greatly reduces transport burden.
Features:
1. Large watered perimeter, small hydraulic radius.
2. Good laminar flow, particles fall without being disturbed by flocculated flow.
3. As long as the inclined pipe is 1 meter, the effective load is designed for 3-5 tons / m2. VO in the range of 2.5-3.0 mm / sec and the best water quality.
4. The adoption of a honeycomb inclined pipe at the entrance to the water with a pipe of 2.0-3.0 meters ensures safe operation at a high turbidity of 50-100 kg / m3 of clay sand.
5. The processing power of inclined pipe clarifiers is the horizontal flow of the clarifier by 3-5 times, the acceleration of water clarification and pulsed illumination of water by 2-3 times.
Available tube diameters: 35mm, 40mm, 50mm, 80mm. Different sheet thickness and material.
Technical details:
Sheet thickness, mm - 0.2; 0.3; 0.4; 0.5, etc.
Size, mm - 1000x340 or other on request;
Stacking angle -60 °, 70 °
Horizontal flow of water, mm / s - 2.5-3
Load effect-3 ~ 5 tons * m2 * h
Standby time -4.5 ~ 6min
Specification:
Diameter, mm -50
Surface area, m2/m3 - 118
Porosity - 97,4
Weight (Т-0,4 mm, SS304), kg/m3 - 203
