0
TelegramViberWhatsapp
+38 063 3621231
+38 036 2622033
info@saleindustry.com

Stainless steel thermal gas mass flow meter DN400/PN16 (compressed air), 45-36500 Nm3/h, 4-20mA+RS485, plug-in

Code: 1051621
(0 review)
Connection diameter, DN400
Control signal, mA4-20mA+RS485
Flow range45...36500 Nm3/h
Accuracy class (measurement error), %2,5
Voltage, V24
DisplayEnglish-display, cumulative and instantaneous flow display
Type of flow meterthermal gas mass flow meter
ProducerBTS Engineering
ProtectionIP65
Explosion protectionNo
Nom.pressure, Mpa1,6
Housing materialAISI 304 stainless steel
Connection typePlug-in
Operating temperature85°C
Country of OriginChina
Show all features (15)
Ukraine: Pre-order only
Poland: Pre-order only
Germany: Pre-order only
Italy: Pre-order only
$2,139.74 (netto)
Добавить в сравнение
We deliver anywhere in the world
Thermal mass gas flow meter is developed on the basis of thermal dispersion and uses the constant temperature difference method to measure gas flow. It has the advantages of small size, easy installation, high reliability and high measurement accuracy, etc. The flow meter contains two platinum resistance temperature sensors. The thermal principle works by monitoring the cooling effect of the gas flow as it passes over the heated sensor. The gas flowing through the sensing section passes over two sensors, one of which is used traditionally as a temperature sensor and the other as a heater. The temperature sensor monitors the actual process values, while the heater maintains a constant temperature difference by varying the power consumed by the sensor. The greater the gas velocity, the greater the cooling effect and the power required to maintain the temperature difference. The measured heater power is therefore a measure of the mass flow rate of the gas.
Connection diameter, DN400
Control signal, mA4-20mA+RS485
Flow range45...36500 Nm3/h
Accuracy class (measurement error), %2,5
Voltage, V24
DisplayEnglish-display, cumulative and instantaneous flow display
Type of flow meterthermal gas mass flow meter
ProducerBTS Engineering
ProtectionIP65
Explosion protectionNo
Nom.pressure, Mpa1,6
Housing materialAISI 304 stainless steel
Connection typePlug-in
Operating temperature85°C
Country of OriginChina
Loading...
Products from the same category
Stainless steel gas mass flow meter DN25/PN16 (oxygen in gaseous state), 0.5-89 Nm3/h, 4-20mA+RS485, threaded connection
1051988
Connection diameter, DN
25
Control signal, mA
4-20mA+RS485
Preorder
0
$2,037.39
DN20 Stainless steel flow meter (rotameter) 5atm (mixture of methanol and KOH, density 780-810 kg/m3 ), 0.25-0.4 m3/h
1051893
Connection diameter, DN
20
Flow range
0,25...0,4 m3/h
In stock
0
$769.69
DN20 Stainless steel flow meter (rotameter) 1-10atm for soybean oil with a density of 985 kg/m3, 0.25-2.5 m3/h
1051894
Connection diameter, DN
20
Flow range
0,25...2,5 m3/h
In stock
0
$769.69
DN20 Liquid turbine flow meter for gasoline PN16, 0,7-7 m3/h, 4-20mA stainless steel AISI 316
1051877
Connection diameter, DN
20
Control signal, mA
4-20
Preorder
0
$1,119.86
2” M-50 38-550 l/min Positive Displacement Flow Meter with Printer Preset Counter for diesel fuel, benzine
1051764
Connection diameter, DN
2"
Flow range
38...550 l/h
Preorder
0
$1,723.98
DN150 Electromagnetic flow meter KLD PN40 (water), 6,36-636 m3/h, 4-20mA+RS485, 220V
1051615
Connection diameter, DN
150
Control signal, mA
4-20mA+RS485
Preorder
0
$2,254.70
DN120 Electromagnetic flow meter KLD PN16 (water), 4.41-441 m3/h, 4-20mA+RS485
1051613
Connection diameter, DN
120
Control signal, mA
4-20mA+RS485
Preorder
0
$1,529.81
DN80 Stainless steel vortex flow meter KLUGB PN16 RF DIN flange, for steam 0.18-5.5 t/h <1,6 МПа, 120-145°C, 4-20mA, ExdIIBT6
1050978
Connection diameter, DN
80
Control signal, mA
4-20
Preorder
0
$2,591.36
DN80 Oval gear flow meter of cast iron KLC-A80.2/Z DN80, for sunflower oil 10-60 m3/h, 2-200 mPa.s
1050982
Connection diameter, DN
80
Accuracy class (measurement error), %
0,5
Preorder
0
$1,948.14
DN20 carbon steel electromagnetic flow meter KLD PN16 (potassium hydroxide KOH-50%, ammonia 25% liquid), 0.11-11 m3/h, 4-20mA+HART
1050969
Connection diameter, DN
20
Control signal, mA
4-20mA+HART
Preorder
0
$2,071.72
Contact us