DAB Evosta 2 is an electronic wet rotor circulation pump designed for water recirculation in heating and air conditioning systems in domestic and residential installations.
Evosta 2 is equipped with a permanent magnet synchronous motor and frequency-controlled electronics that automatically adapts performance to the needs of the system, ensuring energy savings and protection against water hammer.
Ideal for replacing old three-speed circulators thanks to its compact size and wide functionality. Combines the reliability of a mechanical pump with the advantages of electronic control.
Easy to set up: a sequential button allows you to switch between nine operating modes.
Pump housing in cast iron with cataphoretic coating, motor housing in stainless steel. Electronics are protected against water according to IPX5 class.
The included descaling cartridge keeps the motor shaft in perfect condition, preventing the formation of limescale deposits that can occur inside the circulator in the presence of air bubbles during initial start-up.
TECHNICAL DATA:
Operating range: from 0.4 to 3.6 m³/h at a head of up to 6.9 m.
Liquid temperature range: from -10 °C to +110 °C.
Operating pressure: 10 bar (1000 kPa).
Degree of protection: IPX5.
Insulation class: F.
Installation: with horizontal motor shaft.
Standard power supply: single-phase 1×230 V, 50/60 Hz.
Pumped liquid: clean, free of solids and mineral oils, low-viscosity, chemically neutral, similar in properties to water (max. glycol content 50%).
Water quality: clean, free of solids or abrasives, low-viscosity, non-aggressive, non-crystallized and chemically neutral.
