The HYDROPONIC SYSTEM culture medium controller on the computer is the most advanced automatic fertigation system. With the installed software using a computer, we can monitor and control the computer, all water values can be easily changed from any computer, without going to the object.
The HYDROPONIC SYSTEM by Computer is ideal for all types of crops, with precise pH and EC regulation. It regulates the water levels in the tank automatically and performs the function of measuring and regulating the water temperature.
Various operating modes:
- continuous mode of continuous recirculation of systems;
- hourly and daily mode to activate the pump irrigation on time.
In addition, you can program pump C to a water meter that is turned on in the manifold by performing a ml / L booster in order not to change the EC. The flow of each of the pumps with a capacity of 0 to 7 l / h is independently adjustable.
The scope of delivery includes: The controller is delivered fully equipped and mounted on a methacrylate panel, in which it is only necessary to connect the inlet and outlet hoses of the circulation pump using simple quick couplings. It is fully equipped including: programming and communication manual, pH7, pH4 and 1.430 MS / cm calibration envelopes, inlet and outlet pipes, wall plugs and screws.
Hydropinic System by Computer
Injector
Conductivity sensor
Recirculation water resistant pump
Flow sensor
Temperature sensor
Suction filter
Filling solenoid valve
Water entrance
pH sensor
Water pump
Pulse water meter
Heater resistance
Maximum level sensor
Irrigation start level sensor
Signal level sensor
Impurity filter
Applications: greenhouse, hydroponics, greenhouse, hydroponics, greenhouse, hydroponics.
