0
TelegramViberWhatsapp
+38 063 3621231
+38 036 2622033
info@saleindustry.com

PW.1.21.1.1100 two-stage vacuum pump

Code: 1030924
(0 review)
ProducerHydro-Vacuum
Pump capacity, cu.m/hour10.5
Power capacity, kW1,1
Materialcast iron
Rate of turn, rpm3 000
Power supply3х380 V, 50 Hz
Explosion protectionNo
Max.flow rate, m3/h10.5
SealMechanical Seal
Shaft materialAISI 420
Impeller materialbronze
Vacuum depth, mBar40
Housing materialСast iron
Serial number of the pumpPW
Country of OriginPoland
PumpTypevacuum
Drive Typeelectric
Installation Typehorizontal
Type of configurationwith engine
Applicationevaporators, residue, autoclave
Analogue forPompetravaini TRM, Nitto, ВВН, Becker, Busch, Vacuummash, Elmo rietschle, EVP, Robuschi, Italvacuum, Sterling, DVP
Weight, kg48
Show all features (22)
Ukraine: Pre-order only
Poland: Pre-order only
Germany: Pre-order only
$1,949.62 (netto)
Добавить в сравнение
We deliver anywhere in the world
Water-ring vacuum pumps of the PW1-21 – PW5-24 series are two-stage vacuum pumps, the main feature of which, unlike single-stage pumps, is the achievement of a deeper vacuum (33-40 mbar abs.). Maximum performance and efficiency in the range from 100-200 mbar. abs. These pumps have a built-in anti-cavitation valve between the stages. They are reliable, easy to maintain, they can be used to pump out almost any gas medium or steam. Vacuum pumps are designed for suction and pumping of dry gas with a temperature of up to 150°C and vapor-saturated gases, characterized in that their temperature does not exceed 100°C, with the possibility of using working fluids with a viscosity of up to 60 mm2 / sec and a density of 800-1200 kg/m3, the water temperature at the pump outlet should not exceed 80°C. Hydro-Vacuum produces single-stage and two-stage vacuum water ring pumps, PW series. In the PW series pumps, the pump and the motor are mounted on a common support. The torque from the motor is transmitted to the impeller through a shaft mounted in the support bearings and an elastic coupling. This design makes the vacuum pump noticeably longer and heavier, but it significantly facilitates its maintenance when it is necessary to disassemble the pump or replace the engine. In addition, the pump is mounted on 2 supports (the impeller between the bearings), which gives a much longer service life of the pumps than a monoblock (mounted on the motor shaft or the landing of the impeller) Standard material design of pumps: pump body, links-cast iron 250; rotor-tin bronze B101; shaft-steel 2H13 (AISI 420). If the customer needs and wishes, the material execution may be different. The housings are chrome-plated cast iron, tin-plated bronze, carbon cast steel, austenitic cast steel; The rotor is spheroidal cast iron, austenitic cast steel, carbon cast steel, special austenitic cast steel. The shaft is acid-resistant steel. Each pump can have a complete set with different engines (kW) in terms of power, if the customer needs, we make the selection on an individual basis.
Category: Vacuum pump
ProducerHydro-Vacuum
Pump capacity, cu.m/hour10.5
Power capacity, kW1,1
Materialcast iron
Rate of turn, rpm3 000
Power supply3х380 V, 50 Hz
Explosion protectionNo
Max.flow rate, m3/h10.5
SealMechanical Seal
Shaft materialAISI 420
Impeller materialbronze
Vacuum depth, mBar40
Housing materialСast iron
Serial number of the pumpPW
Country of OriginPoland
PumpTypevacuum
Drive Typeelectric
Installation Typehorizontal
Type of configurationwith engine
Applicationevaporators, residue, autoclave
Analogue forPompetravaini TRM, Nitto, ВВН, Becker, Busch, Vacuummash, Elmo rietschle, EVP, Robuschi, Italvacuum, Sterling, DVP
Weight, kg48
Loading...
Also buy with this product
Pump Сontroller Y1-4000D, ABS plastic, 3-phase 380V-415V, 0,75-4kW
Producer
BTS Engineering
Power capacity, kW
0,75-4
In stock
0
$123.52
PN16 DN125 Butterfly valve, body and disc made of stainless steel AISI 304, Seat PTFE
Conditional passage,DN
125
Material of the disk
AISI 304 stainless steel
In stock
0
$146.45
Pump Сontroller 20Y-3000, ABS plastic, 1-phase 220V-240V, 0,37-3kW
Producer
BTS Engineering
Power capacity, kW
0,37-3
In stock
0
$82.35
PN16 DN40 Stainless steel ball valve AISI 316, seat PTFE
Conditional passage,DN
40
Producer
BTS Engineering
In stock
0
$182.81
DN50 Thermodynamic flanged condensate trap PN16/1.0619
Conditional passage,DN
50
Producer
BTS Engineering
In stock
0
$483.25
PN16 DN150 Butterfly valve, body and disc made of stainless steel AISI 304, Seat PTFE
Conditional passage,DN
150
Material of the disk
AISI 304 stainless steel
In stock
0
$175.14
DN25 Pneumatically actuated control valve 10P11Y-DNx2516Z-L112C-C (CF8 body, SS304 seat) with YT-1000 positioner, 4-20mA input, Ex
Conditional passage,DN
25
Control signal, mA
4-20
Preorder
0
$2,156.03
Control panel for pump, 4 kW
Producer
BTS Engineering
Power capacity, kW
4
In stock
0
$427.46
PN16 DN125 Butterfly valve, cast iron body, AISI 304 disc, Seat EPDM
Conditional passage,DN
125
Material of the disk
AISI 304 stainless steel
In stock
0
$59.06
Pump Сontroller Y1-7500D, ABS plastic, 3-phase 380V-415V, 1,1-7,5 kW
Producer
BTS Engineering
Power capacity, kW
1,1-7,5
In stock
0
$131.26
PN16 DN150 Butterfly valve, cast iron body, AISI 304 disc, Seat EPDM
Conditional passage,DN
150
Material of the disk
AISI 304 stainless steel
In stock
0
$75.89
Pump Сontroller Y1-11000D, ABS plastic, 3-phase 380V-415V, 1,1-11kW
Producer
BTS Engineering
Power capacity, kW
1,1-11
In stock
0
$141.53
Pump Сontroller Y1-15000D, ABS plastic, 3-phase 380V-415V, 2,2-15 kW
Producer
BTS Engineering
Power capacity, kW
2,2-15
In stock
0
$164.70
Control panel for pump, 1.5 kW
Producer
BTS Engineering
Power capacity, kW
1,5
In stock
0
$225.79
Control panel for pump, 3 kW
Producer
BTS Engineering
Power capacity, kW
3
In stock
0
$415.77
Pump Сontroller Y1-18500D, ABS plastic, 3-phase 380V-415V, 3-18,5kW
Producer
BTS Engineering
Power capacity, kW
3-18,5
In stock
0
$200.71
Pump Сontroller Y1-22000D, ABS plastic, 3-phase 380V-415V, 4-22kW
Producer
BTS Engineering
Power capacity, kW
4-22
In stock
0
$236.74
Control panel for pump, 5.5 kW
Producer
BTS Engineering
Power capacity, kW
5,5
In stock
0
$441.80
Control panel for pump, 2.2 kW
Producer
BTS Engineering
Power capacity, kW
2,2
In stock
0
$301.99
Control panel for pump, 7.5 kW
Producer
BTS Engineering
Power capacity, kW
7,5
In stock
0
$448.62
PN16 DN32 Stainless steel ball valve AISI 316, seat PTFE
Conditional passage,DN
32
Producer
BTS Engineering
In stock
0
$151.87
Control panel for pump, 22 kW
Producer
BTS Engineering
Power capacity, kW
22
In stock
0
$1,724.41
Control panel for pump, 11 kW
Producer
BTS Engineering
Power capacity, kW
11
In stock
0
$463.25
Control panel for pump, 18.5 kW
Producer
BTS Engineering
Power capacity, kW
18,5
In stock
0
$748.87
Control panel for pump, 15 kW
Producer
BTS Engineering
Power capacity, kW
15
Preorder
0
$620.95
Products from the same category
PW.7.13.1.1010 single-stage vacuum pump
Producer
Hydro-Vacuum
Pump capacity, cu.m/hour
1150
Preorder
0
$27,616.23
PW.7.13.1.1100 single-stage vacuum pump
Producer
Hydro-Vacuum
Pump capacity, cu.m/hour
1150
Preorder
0
$28,771.19
PW.7.14.1.1010 single-stage vacuum pump
Producer
Hydro-Vacuum
Pump capacity, cu.m/hour
1500
Preorder
0
$31,078.82
PW.7.14.1.1100 single-stage vacuum pump
Producer
Hydro-Vacuum
Pump capacity, cu.m/hour
1500
Preorder
0
$32,023.66
PW.1.21.1.1010 two-stage vacuum pump
Producer
Hydro-Vacuum
Pump capacity, cu.m/hour
10.5
Preorder
0
$1,888.60
PW.1.22.1.1010 two-stage vacuum pump
Producer
Hydro-Vacuum
Pump capacity, cu.m/hour
21
Preorder
0
$1,961.36
PW.1.22.1.1100 two-stage vacuum pump
Producer
Hydro-Vacuum
Pump capacity, cu.m/hour
21
Preorder
0
$2,021.24
PW.1.23.1.1010 two-stage vacuum pump
Producer
Hydro-Vacuum
Pump capacity, cu.m/hour
51
Preorder
0
$2,234.85
PW.1.23.1.1100 two-stage vacuum pump
Producer
Hydro-Vacuum
Pump capacity, cu.m/hour
51
Preorder
0
$2,250.08
PW.4.22.1.1010 two-stage vacuum pump
Producer
Hydro-Vacuum
Pump capacity, cu.m/hour
110
Preorder
0
$4,476.76